Slice 3D - расширение, позволяющее создавать разрез по произвольному профилю, инструмент для создания информационной геолого-геофизической модели породного массива средствами ArcGIS. Мы рекомендуем использовать модуль совместно со свободным расширением Typeconvert

Ссылки
Лицензионное соглашение
Вопросы и требования при установке
Руководство пользователя Slice 3D (рус)
Описание работы программы (рус)
"Использование Slice 3D"
"Работа в ArcScene"
"Работа в Grapher "
"Создание профиля на основе изолиний рельефа"
"Окна и диалоги в Slice3D " (рус)
"Создание базового профиля " (рус)

"Создание слоев элементов разреза " (рус)

Диалог Базовый профиль (Base profile)
Предназначен для создания базовой точечной темы, на основе которой проводятся последующие расчеты и построения. В результате расчета тема содержит координаты опорных и дополнительных точек с расчетными отметками залегания пластов и расстояниями от начальной и конечной точек исходной линии.

Диалог Элементы разреза (Slice elements)
Предназначен для создания набора векторных слоев в координатах LZ, составляющих базу геоданных разреза. В результате расчета создается новый набор слоев, включающий атрибуты названий пластов. Диалог может быть использован для перепроецирования данных с одного разреза на другой.

Диалог Создать 3D (To 3D)
Создает 3d слой из слоя, выполненного на плоскости разреза. Предназначен для проецирования слоев данных, вновь создаваемых в виде разреза, из координат LZ в XY.

О программе
Краткая информация об авторах, регистрация, домашняя страница.

Trial version (20 days) and/or update.
Загрузить zip архив
Купить

Slice 3D is the ArcGIS extension intended for making of information geological-geophysical model of a rock mass. This solution include unique support of "two-scale" geological graphics. We recommend to use tools together with a free Typeconvert extension. Also we recommend to use module KMLer as an extension for support universal Google 4D Z-service. Slice3D include free and commercial functions.
If you have problems by installation then see this page. 

• More info about Slice3D see in Docs

User manual (pdf)

Flash presentations:
How to use
Work in ArcScene
Send data to Grapher
Create slice from the polyline DEM
Interface of Slice 3D (rus)
Base profile (rus)
Slice elements (rus)
 

For what this program?

At the analysis of the data of study of a rock mass there are following problems:

• How most simply to execute special graphic constructions, whenever possible not using other programs, except the ArcGIS?
• How to compare the numerical and descriptive data?
• How to receive the updated plan, a set of slices and 3d model on the uniform attributive data?
• How to carry out geologic constructions in one plane of a slice and to transfer them to another?
• How to find intersections of a slice surface with other objects?
• How to construct projections of objects to a surface of a slice?
• How to organize two-scale constructions?

To solve a considerable proportion of these problems the program module Slice3d is created. This is the tool for making of information geological-geophysical model of a rock mass.

Overview

Slice 3D is the ArcGIS extension intended for making of information geological-geophysical model of a rock mass. This solution include unique support of "two-scale" geological graphics. We recommend to use tools together with a free Typeconvert extension. Also we recommend to use module KMLer as an extension for support universal Google 4D Z-service. Slice3D include free and commercial functions.
If you have problems by installation then see this page.

User manual (pdf)

Flash presentations

How to use
Work in ArcScene
Send data to Grapher
Create slice from the polyline DEM
Interface of Slice 3D (rus)
Base profile (rus)
Slice elements (rus)

Points along profile

Create points along profile line. As a result the class contains coordinates of basic and additional points with design marks of seams burial and distances from initial and final points of an initial line. Also tools for create of profile from Google Earth Z-service with module KMLer.

Possible arrangements of points along a profile line:
1. Amount of points
2. Interval between points in terms of measurement of the map
3. Generalization
4. 'As is' (initial nodes of a profile line).

Output data

Output feature class is a M-point feature class, with following attributes:
- 'X','Y' - point's coordinates
- 'Dist', 'Dist_Rev' - a distance to the points from the beginning and from the end along a profile line.
Optionally, you can export feature class (attributes's table) to the MS Excel.

Base profile

It is intended for creating a base point class on the basis of which the subsequent calculations and constructions are carried out. As a result the class contains coordinates of basic and additional points with design marks of seams burial and distances from initial and final points of an initial line.

Input data

For successful operation of the extension following input data is necessary:
1. Profile line - a an arbitrary profile line: either graphics or feature.
2. Subbase's raster layers (TINs, grids or other raster format) or subbase's vector layer
(polyline or polygon feature class, containing an elevation field). For multiband raster data an elevation values are gets from each band. In case of slice creation on a vector subbase, points of a slice creates on intersections of a profile line with a vector layer.

Possible arrangements of points along a profile line:
1. Amount of points
2. Interval between points in terms of measurement of the map
3. Generalization
4. 'As is' (initial nodes of a profile line).

Output data

Output feature class ("slice") is a MZ-point feature class, with following attributes:
- 'X','Y' - point's coordinates
- 'Dist', 'Dist_Rev' - a distance to the points from the beginning and from the end along a profile line.
- Values of a subbase's layers attributes (in case of vector subbase - all attributes of vector feature class)
Optionally, you can plot standard chart of the set of graphs and export feature class (attributes's table) to the MS Excel.

Slice element

It is intended for creating a set of vector layers in LZ coordinates compounding base of the slice geodata. As a result the new set of layers including attributes of slices names is created. Form can be used for re-projection the data from one slice on another.

To 3D

Create 3d-layer from a layer constructed on a plane of a slice. It is intended for displaying layers of the data again created as a slice, from coordinates LZ to XY.

About

Versions:
ArcGIS 9.2 and Net 2.0 Download
ArcGIS 9.1 and Net 2.0 Download
ArcGIS 9.1 and Net 1.1 Download

Trial version
( 20 days ) and/or update.
Unzip and run Slice3d.msi

Buy It

Individual price, USD